Version Description
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command.
Usage
Information
IGMP commands accept only non-VLAN interfaces — specifying VLAN does not
yield results.
The show ip igmp interface command does not display information
corresponding to the loop-back interfaces.
Example
Dell#show ip igmp interface
TenGigabitEthernet 1/1 is down, line protocol is down
Internet protocol processing disabled
TenGigabitEthernet 1/5 is down, line protocol is down
Internet protocol processing disabled
TenGigabitEthernet 1/6 is down, line protocol is down
Internet protocol processing disabled
TenGigabitEthernet 1/7 is up, line protocol is down
Internet protocol processing disabled
Vlan 20
Inbound IGMP access group is not set
Internet address is 35.0.0.1/24
IGMP is enabled on interface
IGMP query interval is 60 seconds
IGMP querier timeout is 125 seconds
IGMP max query response time is 10 seconds
IGMP last member query response interval is 1000 ms
IGMP immediate-leave is enabled for all groups
IGMP activity: 0 joins
IGMP querying router is 35.0.0.1 (this system)
IGMP version is 2
Example (VRF)
Dell#show ip igmp vrf BLUE interface
TenGigabitEthernet 1/20
Inbound IGMP access group is not set
Internet address is 50.10.4.1/24
IGMP is up on the interface
IGMP query interval is 60 seconds
IGMP querier timeout is 0 seconds
IGMP max query response time is 10 seconds
IGMP last member query response interval is 1000 ms
IGMP immediate-leave is disabled
IGMP activity: 0 joins
IGMP querying router is 50.10.4.1 (this system)
IGMP version is 3
Vlan 4007
Inbound IGMP access group is not set
Internet address is 50.30.124.4/24
IGMP is up on the interface
IGMP query interval is 60 seconds
IGMP querier timeout is 83 seconds
IGMP max query response time is 10 seconds
IGMP last member query response interval is 1000 ms
IGMP immediate-leave is disabled
IGMP activity: 0 joins
IGMP querying router is 50.30.124.1
Internet Group Management Protocol (IGMP)
775