Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Introduced.
Usage
Information
To assign a network entity title to enable IS-IS, use the net command.
This command accepts even if an IP address is not configured. This command is
cached in the L3 Manager till the IP address is configured. When the IP address
configuration reaches the L3Manager, the circuit add message is sent to IS-IS.
NOTE: IP address is not mandatory for forming IS-IS adjacency.
Related
Commands
net — configures an IS-IS network entity title (NET) for the routing process.
router isis — enables the IS-IS routing protocol.
ipv6 router isis
Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
Syntax
ipv6 router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag (OPTIONAL) This parameter is a unique name for a routing
process. A null tag is assumed if the tag option is not
specified. The tag name must be unique for all IP router
processes for a given router.
Defaults Not configured.
Command
Modes
ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Intermediate System to Intermediate System (IS-IS)
1051