Filter
Top Products
Combination: 3, 4, 5-10, 8
Command
Modes
VLT DOMAIN PROXY GW STATIC
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
You can configure the MAC address, of a VLT peer in remote VLT Domain, to be
associated with the static VLT proxy gateway and exclude a VLAN or a range of
VLANs from proxy routing..
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)#remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3
peer-domain-link port-channel exclude-vlan
Configure the VLT port channel, which is connected to remote VLT domain for Proxy Gateway and
configure the VLANs that needs to be excluded from VLT Proxy Gateway.
S4820T
Syntax
[no] peer-domain-link port-channel interface-identifier
exclude-vlan vlan-range
Parameters
port-channel Configure the proxy-gateway interface port-channel. Port
channel range is from 1 to 128.
vlan-range
Enter the VLAN IDs in which proxy gateway is not needed.
The VLANs are excluded from doing proxy gateway. The
value can be a single VLAN ID or comma-separated, VLAN
IDs or a range of VLAN IDs or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
1868
VLT Proxy Gateway