Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
To return to the default setting, use the no aaa authentication enable
{default | method-list-name} method [... method2] command.
Parameters
default Enter the keyword default then the authentication
methods to use as the default sequence of methods for the
Enable login. The default is default enable.
method-list-
name
Enter a text string (up to 16 characters long) to name the list
of enabled authentication methods activated at login.
method Enter one of the following methods:
enable: use the password the enable password
command defines in CONFIGURATION mode.
line: use the password the password command defines
in LINE mode.
none: no authentication.
radius: use the RADIUS servers configured with the
radius-server host command.
tacacs+: use the TACACS+ server(s) configured with the
tacacs-server host command.
... method2 (OPTIONAL) In the event of a “no response” from the first
method, Dell Networking OS applies the next configured
method.
Defaults Use the enable password.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
Security
1587