Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Usage
Information
This command is available with or without RBAC enabled. When RBAC is enabled
you can restrict access to audit and security logs based on the CLI sessions’ user
roles. If extended logging is disabled, you can only view system events, regardless
of RBAC user role.
When you enabled RBAC and extended logging:
Only the system administrator role can execute this command.
The system administrator and system security administrator roles can view
security events and system events.
The system administrator role can view audit, security, and system events.
The network administrator and network operator roles can view system events.
Examples
Dell(conf)#logging extended
Related
Commands
show logging auditlog — displays audit log, clear logging auditlog— clears audit log
logging console
Specify which messages are logged to the console.
Syntax
logging console [level]
To return to the default values, use the default logging console command.
To disable logging to the console, use the no logging console command.
Parameters
level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the
following parameters: emergencies, alerts, critical,
errors, warnings, notifications, informational, or
debugging. The default is 7 or debugging.
Defaults level = 7; size = debugging
Command
Modes
CONFIGURATION
1726
Simple Network Management Protocol (SNMP) and Syslog