Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
NOTE: If authentication fails using the primary method, Dell Networking OS
employs the second method (or third method, if necessary) automatically. For
example, if the TACACS+ server is reachable, but the server key is invalid, Dell
Networking OS proceeds to the next authentication method. The TACACS+ is
incorrect, but the user is still authenticated by the secondary method.
After configuring the aaa authentication login command, configure the
login authentication command to enable the authentication scheme on
terminal lines.
Connections to the SSH server work with the following login mechanisms: local,
radius, and tacacs.
Related
Commands
login authentication — enables AAA login authentication on the terminal lines.
password — creates a password.
radius-server host — specifies a RADIUS server host.
tacacs-server host — specifies a TACACS+ server host.
access-class
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-
name
Enter the name of an established IP Standard ACL.
Defaults Not configured.
Command
Modes
LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
1590
Security