Filter
Top Products
ip domain-name
Configures the default domain corresponding to a specific VRF. This domain is appended to the in
complete DNS requests corresponding to the specified VRF.
S4820T
Syntax
ip domain-name [vrf vrf-name] name
To undo the domain name configuration corresponding to a specific VRF, use the
no ip domain-name [vrf vrf-name] name command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the
VRF to configure the domain corresponding to that VRF.
name Enter the name of the domain to be appended to the in
complete DNS requests corresponding to the specified VRF.
Defaults None
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
Use this command to configure a domain name corresponding to a VRF. This
domain is appended to the in complete DNS requests corresponding to the
specified VRF.
Example
Dell(conf)#ip domain-name vrf jay dell.com
ip domain-list
Adds a domain name to the DNS list. This domain name is appended to incomplete host names in DNS
requests corresponding to a specific VRF.
S4820T
Syntax
ip domain-list [vrf vrf-name] name
To remove a domain name from DNS list, use the no ip domain-list [vrf
vrf-name] name command.
Dynamic Host Configuration Protocol (DHCP)
679