Filter
Top Products
• AS-PATH ACL
• COMMUNITY-LIST
• PREFIX-LIST
• ROUTER OSPF
• ROUTER RIP
• ROUTER ISIS
• ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Related
Commands
end — returns to EXEC Privilege mode.
ftp-server enable
Enable FTP server functions on the system.
Syntax
ftp-server [vrf vrf-name] enable
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to
enable the FTP server to listen to that VRF instance.
NOTE: Use this attribute to specify the VRF that is used
by the FTP server to accept client connections. If no VRF
is specified, then the default VRF is used.
Control and Monitoring
115