Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
neighbor
router-id
(OPTIONAL) Enter the keyword neighbor then the
neighbor’s router-id in dotted decimal format (A.B.C.D.).
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Related
Commands
show ip ospf statistics — displays the OSPF statistics.
debug ip ospf
Display debug information on OSPF. Entering the debug ip ospf commands enables OSPF debugging
for the first OSPF process.
S4820T
Syntax
debug ip ospf [process-id] [vrf vrf-name] [bfd |event | packet
| spf | database-timer rate-limit]
To cancel the debug command, use the no debug ip ospf command.
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
vrf vrf-name Enter the keyword vrf to view debugging information on
OSPF corresponding to that VRF.
bfd (OPTIONAL) Enter the keyword bfd to debug only OSPF BFD
information.
Open Shortest Path First (OSPFv2 and OSPFv3)
1267