Filter
Top Products
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a tunnel interface, enter the keyword tunnel. The
range is from 1 to 16383.
vrrp [[ipv6] vrid] (OPTIONAL) Enter the keyword vrrp to clear the counters of
all VRRP groups. To clear the counters of VRRP groups on all
IPv6 interfaces, enter ipv6. To clear the counters of a
specified group, enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear
unknown source address (SA) drop counters when MAC
learning limit is configured on the interface.
vlan vlan-id Enter the keyword vlan followed by the interface VLAN
number. The range is from 1 to 4094.
Defaults Without an interface specified, the command clears all interface counters.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Added the vlan parameter.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.4.1.0 Added support (E-Series only) for VRRP groups in a VRF
instance.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added support for 4093 VLANs on the E-Series ExaScale.
Prior to the release, 2094 was supported.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Updated the definition of the learning-limit option for
clarity.
790
Interfaces