Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
13.1.2.0 13.1.1.1 1184 0x8000006b 0x1c22 0
172.16.1.0 13.1.1.1 148 0x8000006d 0x533b 0
Dell>
Related
Commands
show ip ospf database asbr-summary — displays only ASBR summary LSA
information.
show ip ospf database asbr-summary
Display information about autonomous system (AS) boundary LSAs.
S4820T
Syntax
show ip ospf [process-id | vrf vrf-name] database asbr-summary
[link-state-id] [adv-router ip-address]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to
view display information about AS boundary LSAs
corresponding to a specific VRF.
link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
the network’s IP address for Type 3 LSAs or Type 5 LSAs
the router’s OSPF router ID for Type 1 LSAs or Type 4
LSAs
the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-
address
(OPTIONAL) Enter the keywords adv-router and the ip-
address to display only the LSA information about that
router.
Command
Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
1310
Open Shortest Path First (OSPFv2 and OSPFv3)