Filter
Top Products
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to view information related only to ipv4
unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to view information related only to ipv6
unicast routes.
ip-address (OPTIONAL) Enter the IP address of the neighbor to view
only BGP information exchanged with that neighbor.
advertised-
routes
(OPTIONAL) Enter the keywords advertised-routes to
view only the routes the neighbor sent.
dampened-
routes
(OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-
specific internal information for the IPv4 Unicast address
family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view
flap statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the
neighbor’s feasible routes.
received-
routes
[network
[network-mask]
(OPTIONAL) Enter the keywords received-routes then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
received from neighbors.
NOTE: Configure the neighbor soft-
reconfiguration inbound command prior to
viewing all the information received from the neighbors.
denied-routes
[network
[network-mask]
(OPTIONAL) Enter the keywords denied-routes then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
on routes denied via neighbor inbound filters.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
Border Gateway Protocol
507