Filter
Top Products
• ipv6 nd raguard policy policy-name — Defines the RA guard policy name and
enter the RA guard policy configuration mode.
other-config-flag
Enable the verification of the advertised other configuration parameter. If this command is not
configured, the verification process is bypassed.
Syntax
other-config-flag {on | off}
To reset the other configuration parameter, use the no other-config-flag
{on | off} command.
Parameters
on Enter the keyword on to set the other-config-flag value as
ON.
off Enter the keyword off to set the other-config flag value as
OFF.
Defaults none
Command
Modes
POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands
• ipv6 nd ra-guard enable — Allows you to configure the RA guard related
commands.
• ipv6 nd raguard policy policy-name — Defines the router advertisement (RA)
guard policy name and enter the RA guard policy configuration mode.
reachable-time
Enable the verification of the configured reachability time in the received RA packets.
Syntax
reachable—time value
To reset the advertised reachability time, use the no reachable-timevalue
command.
Neighbor Discovery Protocol (NDP)
1233