Filter
Top Products
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease then the amount of time the IP
address are leased. The range is from 1 to 4294967295.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
Related
Commands
show ip dhcp snooping — displays the contents of the DHCP binding table.
IPv6 DHCP Snooping Binding
Create a static DHCP snooping binding entry in the snooping database.
Syntax
[no] ipv6 dhcp snooping binding mac address vlan-id vlan-id
ipv6 ipv6-address interface interface-type | interface-number
lease value
To delete the DHCP snooping binding entry from DHCP snooping database, use
the [no] ipv6 dhcp snooping binding mac address vlan-id vlan-id
ipv6 ipv6-address interface interface-type | interface-number
lease valuecommand.
Parameters
mac address Enter the keyword mac then the MAC address of the host to
which the server is leasing the IPv6 address.
vlan-id Enter the keywords vlan-id then the VLAN to which the
host belongs. The range is from 2 to 4094.
Dynamic Host Configuration Protocol (DHCP)
665