Filter
Top Products
show cam mac linecard (count)
Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and
for MAC ACLs.
S4820T
Syntax
show cam mac linecard slot port-set port-pipe count [vlan vlan-
id] [interface interface]
Parameters
linecard slot (REQUIRED) Enter the keyword linecard then a slot
number to select the linecard for which to gather
information.
port-set port-
pipe
(REQUIRED) Enter the keywords port-set then a Port-Pipe
number to select the Port-Pipe for which to gather
information.
count (REQUIRED) Enter the keyword count to display CAM usage
by interface type.
interface
interface
(OPTIONAL) Enter the keyword interface then the
interface type, slot and port information:
• For a port channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is
from 1 to 4094.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
Layer 2
1115