Filter
Top Products
Version Description
9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
show vlt private-vlan
Display the private VLAN (PVLAN) associated with the VLT LAG for VLT peer nodes.
Syntax
show vlt private-vlan
Command
Modes
EXEC
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S6000.
9.3(0.0) Introduced on the Z9000, S4810, and S4820T.
Usage
Information
If you add an ICL or VLTi link as a member of a primary VLAN, the ICL becomes a
part of the primary VLAN and its associated secondary VLANs, similar to the
behavior for normal trunk ports. VLAN symmetry is not validated if you associate an
ICL to a PVLAN. Similarly, if you dissociate an ICL from a PVLAN, although the
PVLAN symmetry exists, ICL is removed from that PVLAN in such a case. The ICL
Status field denotes the type of the VLAN port of the VLTi link configured in a
PVLAN.
Example
Dell#show vlt private-vlan vlan-id
Codes: C- Community, I – Isolated, V – Internally tagged, T –
tagged, * - VLT Pvlan
Primary Secondary ICL Status
10 V (*)
20(C) V
30 (I) V
40 T
50(C) T
60 (I) T
Virtual Link Trunking (VLT)
1865