Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits
per second (Kbps). Make the following value a multiple of 64.
The range is from 0 to 40000000. The default granularity is
Megabits per second (Mbps).
rate The range is from 10 to 40000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to
40000. The default is 100.
Defaults Burst size is 10KB. Granularity for rate is Mbps unless you use the kbps option.
Command
Modes
QOS-POLICY-OUT
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage
Information
On 40-port 10G stack-unit if the traffic is shaped between 64 and 1000 Kbs, for
some values, the shaped rate is much less than the value configured.
Related
Commands
rate shape — shapes traffic output as part of the designated policy.
qos-policy-output — creates a QoS output policy.
service-policy input
Apply an input policy map to the selected interface.
S4820T
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy
input policy-map-name [layer2]
command.
Parameters
policy-map-
name
Enter the name for the policy map in character format (32
characters maximum). You can identify an existing policy
map or name one that does not yet exist.
Quality of Service (QoS)
1485