Filter
Top Products
Usage
Information
Use the vrf vrf-name attribute of this command to clear routes corresponding
to either a specific VRF or the default VRF.
You cannot use this attribute to clear routes corresponding to a management VRF.
Related
Commands
ip route — assigns an IP route to the switch.
show ip route — views the routing table.
show ip route summary — views a summary of the routing table.
clear tcp statistics
Clear TCP counters.
S4820T
Syntax
clear tcp statistics [all | cp | rp1 | rp2]
Parameters
all Enter the keyword all to clear all TCP statistics maintained
on all switch processors.
cp (OPTIONAL) Enter the cp to clear only statistics from the
Control Processor.
rp1 (OPTIONAL) Enter the keyword rp1 to clear only the
statistics from Route Processor 1.
rp2 (OPTIONAL) Enter the keyword rp2 to clear only the
statistics from Route Processor 2.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
IPv4 Routing
901