Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
Parameters
interface (OPTIONAL)
Enter the following keywords and slot/port or number
information:
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
For the Management interface on the stack-unit, enter
the keyword ManagementEthernet then the slot/port
information. The slot range is from 0 to 1. The port range
is 0.
For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
For a Null interface, enter the keyword null then the Null
interface number.
For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
For a stack-unit interface, enter the keyword stack-
unit then the stack unit number.
For a tunnel interface, enter the keyword tunnel then
the tunnel interface number. The range is from 1 to
16383.
brief (OPTIONAL) Enter the keyword brief to view a brief
summary of the interfaces and whether an IP address is
assigned.
configured (OPTIONAL) Enter the keyword configured to display the
physical interfaces with non-default configurations only.
Command
Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
IPv4 Routing
955