Filter
Top Products
show config
Display the current monitor session configuration.
Syntax
show config
Defaults none
Command
Modes
MONITOR SESSION (conf-mon-sess-session-ID)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Example
Dell(conf-mon-sess-1)#show config
!
monitor session 1
source TenGigabitEthernet 1/1 destination Port-channel 1
direction rx
show monitor session
Display information about monitoring sessions.
Syntax
show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor
session command.
Port Monitoring
1429