Filter
Top Products
Parameters
packet-type Enter the keyword packet-type and then the option type
on which to enable debugging. The options are:
• all — Enter the keyword all to enable debugging on all
the options.
• discovery — Enter the keyword discovery to enable
debugging on FCF advertisements and ENode
solicitation.
• virtual-link-instantiation — Enter the keywords
virtual-link-instantiation to enable debugging
on FLOGI, FDISC, and FLOGO packets.
• virtual-link-maintenance — Enter the keywords
virtual-link-maintenance to enable debugging on
FIP clear virtual link frames and keepalives.
• vlan-discovery — Enter the keywords vlan-
discovery to enable debugging on VLAN requests and
notifications.
interface Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel
then a number.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
9.2(0.2) Introduced on the S4810 and S4820T. Added the receive
parameters packet-type and interfaces and their
options.
FIP Snooping
705