Filter
Top Products
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5
vlt-peer-mac transmit
Enables the device to transmit, the peer's MAC address along with its own mac-address in the LLDP TLV
packets, to the remote VLT Domain.
S4820T
Syntax
[no] vlt-peer-mac transmit
Command
Modes
VLT DOMAIN PROXY GW LLDP
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
This command enables the device to transmit its VLT peer’s MAC address along
with its own MAC address to the remote VLT domain. By default, a node will send
only its own MAC address to the remote VLT domain. This configuration is
applicable only for a LLDP proxy gateway. Square VLT Topology with single link
connecting to the remote peers, is a typical use case for this configuration.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# vlt-peer-mac transmit
show vlt-proxy-gateway
Display the VLT proxy gateway configuration.
S4820T
Syntax
show vlt-proxy-gateway [info] {lldp | static}
Parameters
lldp Display details about the LLDP VLT proxy gateway
configuration
static Display details about the static VLT proxy gateway
configuration
1870
VLT Proxy Gateway