Filter
Top Products
Field Description
them. The show ip bgp community command provides
more details on the COMMUNITY attributes.
Dampening
enabled
Displayed only when you enable dampening. Displays the
number of paths designated as history, dampened, or
penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor
received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that
neighbor.
InQ Displays the number of messages from that neighbor
waiting to be processed.
OutQ Displays the number of messages waiting to be sent to that
neighbor. If a number appears in parentheses, the number
represents the number of messages waiting to be sent to
the peer group.
Up/Down
Displays the amount of time that the neighbor is in the
Established stage. If the neighbor has never moved into the
Established stage, the word never is displayed.
The output format is:
Time Established Display Example
< 1 day 00:12:23 (hours:minutes:seconds)
< 1 week 1d21h (DaysHours)
> 1 week 11w2d (WeeksDays)
State/Pfxrcd
If the neighbor is in Established stage, the number of
network prefixes received.
If a maximum limit was configured with the neighbor
maximum-prefix command, (prfxd) appears in this
column.
If the neighbor is not in Established stage, the current stage
is displayed (Idle, Connect, Active, OpenSent,
OpenConfirm). When the peer is transitioning between
states and clearing the routes received, the phrase (Purging)
may appear in this column.
Border Gateway Protocol
521