Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
(Link Data) Router Interface address: 192.68.140.2
Number of TOS metric: 0
TOS 0 Metric: 1
Link connected to: a Stub Network
(Link ID) Network/subnet number: 11.1.5.0
--More--
Related
Commands
show ip ospf database — displays OSPF database information.
show ip ospf database summary
Display the network summary (type 3) LSA routing information.
S4820T
Syntax
show ip ospf [process-id | vrf vrf-name] database summary
[link-state-id] [adv-router ip-address]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to
view LSA routing information corresponding to the OSPF
process that is tied to a specific VRF.
link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
the network’s IP address for Type 3 LSAs or Type 5 LSAs
the router’s OSPF router ID for Type 1 LSAs or Type 4
LSAs
the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-
address
(OPTIONAL) Enter the keywords adv-router then the IP
address of an Advertising Router to display only the LSA
information about that router.
Command
Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1326
Open Shortest Path First (OSPFv2 and OSPFv3)