Filter
Top Products
Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
Example
Dell(conf-crypto-policy)#do show crypto ipsec policy
Policy name : pol1
Policy refcount : 0
Sequence Num : 1
SA Mode : IPSEC-MANUAL
Transform-Set Name :
Peer IP Address :
Inbound AH SPI : 0
Inbound ESP Auth SPI : 0
Inbound ESP Encry SPI : 0
Inbound AH Key : [0]::
Inbound ESP Auth Key : [0]::
Inbound ESP Encry Key : [0]::
Outbound AH SPI : 0
Outbound ESP Auth SPI : 0
Outbound ESP Encry SPI: 0
Outound AH Key : [0]::
Outound ESP Auth Key : [0]::
Outound ESP Encry Key : [0]::
Match sequence Num : 2
Protocol type : tcp
IP or IPv6 : IP
Source address : 1.1.1.1
Source mask : /32
Source port : 0
Destination address : 1.1.1.2
Destination mask : /32
Destination port : 23
source-interface name :
source-interface num :
Dell(conf-crypto-policy)#
transform-set
Specify the transform set the crypto policy uses.
S4820T
Syntax
transform-set transform-set-name
To delete a transform set from the crypto policy, use the no transform-set
transform-set-name command.
Parameters
transform-set-
name
Enter the name for the crypto policy transform set.
Internet Protocol Security (IPSec)
889