Filter
Top Products
Command
Modes
CONFIGURATION
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage
Information
Use this command to create an object that tracks the routing state of an IPv6 Layer
3 interface:
• The status of the IPv6 interface is UP only if the Layer 2 status of the interface is
UP and the interface has a valid IP address.
• The Layer 3 status of an IPv6 interface goes DOWN when its Layer 2 status goes
down (for a Layer 3 VLAN, all VLAN ports must be down) or the IP address is
removed from the routing table.
Related
Commands
• show track ipv6 route – displays information about tracked IPv6 routes,
including configuration, current state, and clients which track the route.
• track interface ip routing – configures object tracking on the routing status of
an IPv4 Layer 3 interface.
track ipv6 route metric threshold
Configure object tracking on the threshold of an IPv4 route metric.
Syntax
track object-id ipv6 route ipv6-address/prefix-len metric
threshold
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to
500.
ipv6-address/
prefix-len
Enter an IPv6 address in X:X:X:X::X format. The valid IPv6
prefix lengths are from /0 to / 128.
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
1256
Object Tracking