Filter
Top Products
When wide transition is configured, narrow metric is sent for the narrow metric TLV
and the actual wide metric is sent in wide metric TLV. The receiver can choose to
use the metric that is requires.
Related
Commands
isis metric — configures a metric for an interface.
multi-topology
Enables multi-topology IS-IS. It also allows enabling/disabling of old and new style TLVs for IP prefix
information in the LSPs.
Syntax
multi-topology [transition]
To return to a single topology configuration, use the no multi-topology
[transition] command.
Parameters
transition
Defaults Disabled
Command
Modes
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.8.1.0 Introduced.
Intermediate System to Intermediate System (IS-IS)
1071