Filter
Top Products
Usage
Information
To protect your network from unauthorized access, use this command to prevent
unauthorized routers from forming adjacencies.
You can assign different passwords for different routing levels by using the
keywords level-1 and level-2.
The no form of this command disables the password for Level 1 or Level 2 routing,
using the respective keywords level-1 or level-2.
This password provides limited security as it is processed as plain text.
isis priority
Set the priority of the designated router you select.
Syntax
isis priority value [level-1 | level-2]
To return to the default values, use the no isis priority [value] [level-1
| level-2] command.
Parameters
value This value sets the router priority. The higher the value, the
higher the priority. The range is from 0 to 127. The default is
64.
level-1 (OPTIONAL) Specify the priority for Level 1. This setting is the
default.
level-2 (OPTIONAL) Specify the priority for Level 2.
Defaults value = 64; level-1 (if not otherwise specified).
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OSCommand Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Intermediate System to Intermediate System (IS-IS)
1061