Filter
Top Products
Parameters
brief (OPTIONAL) Enter the keyword brief to view an
abbreviated list of system information.
stack-unit unit-
id
(OPTIONAL) Enter the keywords stack-unit then the stack
member ID for information on that stack member.
The unit
ID range for the S4820T is from 0 to 11.
stack-ports
status |
topology
(OPTIONAL) Enter the keywords stack-ports for
information about the status or topology of the stack ports.
NOTE: This option applies to the S4810 or S4820T
system only.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for the disabled-ports parameter .
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload
mode. To display Reload mode, use the show reload-
type
command. Modified the show system stack-unit
command output to support Piece Part ID (PPID).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 The Boot Flash field displays the code level for boot code
2.8.1.1 and newer, while older boot codes display as
"Present".
7.7.1.0 Added Master Priority field.
7.6.1.0 Introduced on the S-Series.
Control and Monitoring
165