Filter
Top Products
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related
Commands
match community — redistributes routes that match the COMMUNITY attribute.
show ip bgp community — displays BGP community groups.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-
area}
To remove a set level condition, use the no set level {backbone | level-1
| level-1-2 | level-2 | stub-area} command.
Parameters
backbone Enter the keyword backbone to redistribute matched routes
to the OSPF backbone area (area 0.0.0.0).
level-1 Enter the keyword level-1 to redistribute matched routes
to IS-IS Level 1.
level-1-2 Enter the keyword level-1-2 to redistribute matched
routes to IS-IS Level 1 and Level 2.
level-2 Enter the keyword level-2 to redistribute matched routes
to IS-IS Level 2.
stub-area Enter the keyword stub to redistributed matched routes to
OSPF stub areas.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Access Control Lists (ACL)
309