Message ID Trap Type Trap Option
%RAM-6-RPM_STATE: RPM0 is in Standby State
CHM_RPM_DOWN ENVMON NONE
%CHMGR-2-RPM_DOWN: RPM 0 down - hard reset
%CHMGR-2-RPM_DOWN: RPM 0 down - card removed
CHM_RPM_PRIMARY ENVMON NONE
%RAM-5-COLD_FAILOVER: RPM Failover Completed
%RAM-5-HOT_FAILOVER: RPM Failover Completed
%RAM-5-FAST_FAILOVER: RPM Failover Completed
CHM_SFM_ADD ENVMON NONE
%TSM-5-SFM_DISCOVERY: Found SFM 1
CHM_SFM_REMOVE ENVMON NONE
%TSM-5-SFM_REMOVE: Removed SFM 1
CHM_MAJ_SFM_DOWN ENVMON NONE
%CHMGR-0-MAJOR_SFM: Major alarm: Switch fabric down
CHM_MAJ_SFM_DOWN_CLR ENVMON NONE
%CHMGR-5-MAJOR_SFM_CLR: Major alarm cleared: Switch
fabric up
CHM_MIN_SFM_DOWN ENVMON NONE
%CHMGR-2-MINOR_SFM: MInor alarm: No working standby
SFM
CHM_MIN_SFM_DOWN_CLR ENVMON NONE
%CHMGR-5-MINOR_SFM_CLR: Minor alarm cleared:
Working standby SFM present
CHM_PWRSRC_DOWN ENVMON SUPPLY
%CHMGR-2-PEM_PRBLM: Major alarm: problem with power
entry module %s
CHM_PWRSRC_CLR ENVMON SUPPLY
%CHMGR-5-PEM_OK: Major alarm cleared: power entry
module %s is good
CHM_MAJ_ALARM_PS ENVMON SUPPLY
%CHMGR-0-MAJOR_PS: Major alarm: insufficient power
%s
CHM_MAJ_ALARM_PS_CLR ENVMON SUPPLY
%CHMGR-5-MAJOR_PS_CLR: major alarm cleared:
sufficient power
CHM_MIN_ALARM_PS ENVMON SUPPLY
SNMP Traps
1743