Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Dell Networking OS Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related
Commands
set automatic-tag — computes the tag value of the route.
set metric — specifies the metric value assigned to redistributed routes.
set metric-type — specifies the metric type assigned to redistributed routes.
set tag — specifies the tag assigned to redistributed routes.
set local-preference
To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, configure a filter.
Syntax
set local-preference value
To delete a BGP LOCAL_PREF attribute, use the no set local-preference
command.
Parameters
value Enter a number as the LOCAL_PREF attribute value. The
range is from 0 to 4294967295.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
310
Access Control Lists (ACL)