Filter
Top Products
description
Enter a description of the IS-IS routing protocol.
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the IS-IS protocol (80
characters maximum).
Defaults none
Command
Modes
ROUTER ISIS
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
pre-7.7.1.0 Introduced.
Related
Commands
router isis — Enter ROUTER mode on the switch.
distance
Define the administrative distance for learned routes.
Syntax
distance weight [ip-address mask [prefix-list]]
To return to the default values, use the no distance weight command.
Parameters
weight The administrative distance value indicates the reliability of a
routing information source. The range is from 1 to 255. (A
higher relative value indicates lower reliability. Routes with
smaller values are given preference.) The default is 115.
Intermediate System to Intermediate System (IS-IS)
1037