Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
show ipv6 route
Displays the IPv6 routes.
S4820T
Syntax
show ipv6 route [ipv6-address prefix-length] [vrf vrf-name]
[hostname] [all] [bgp as number] [connected] [isis tag] [list
prefix-list name] [ospf process-id] [rip] [static] [summary]
Parameters
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
then the prefix length in the /x format. The range is from /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the
VRF to display IPv6 routes corresponding to that VRF.
NOTE: If you do not specify this option, routes
corresponding to the default VRF are displayed.
hostname (OPTIONAL) View information for this IPv6 routes with Host
Name.
all (OPTIONAL) View information for all IPv6 routes.
bgp (OPTIONAL) View information for all IPv6 BGP routes.
connected (OPTIONAL) View only the directly connected IPv6 routes.
isis (OPTIONAL) View information for all IPv6 IS-IS routes.
list (OPTIONAL) View the IPv6 prefix list.
ospf (OPTIONAL) View information for all IPv6 OSPF routes.
rip (OPTIONAL for E-Series only) View information for all IPv6
RIP routes.
static (OPTIONAL) View only routes configured by the ipv6
route
command.
summary (OPTIONAL) View a brief list of the configured IPv6 routes.
Defaults none
Command
Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
1010
IPv6 Basics