Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
Lines Beginning
With or Including
Description
Chksum: Displays the OSPF3 checksum.
default-information originate
Configure the Dell Networking OS to generate a default external route into an OSPFv3 routing domain.
S4820T
Syntax
default-information originate [always] [metric metric-value]
[metric-type type-value] [route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that
default route information must always be advertised.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number to
configure a metric value for the route. The range is from 1 to
16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then an
OSPFv3 link state type of 1 or 2 for default routes. The values
are:
1 = Type 1 external route
2 = Type 2 external route
route-map
map-name
(OPTIONAL) Enter the keywords route-map then the name
of an established route map.
Defaults Disabled.
Command
Modes
ROUTER OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.1.(0.0) Introduced on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for C-Series.
7.4.1.0 Introduced on the E-Series.
1352
Open Shortest Path First (OSPFv2 and OSPFv3)