Filter
Top Products
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage
Information
The following describes the show fip-snooping enode command shown in the
following example.
Field Description
ENode MAC MAC address of the ENode.
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF.
VLAN VLAN ID number the session uses.
FC-ID Fibre Channel session ID the FCF assigns.
Example
Dell# show fip-snooping enode
Enode MAC Enode Interface FCF MAC VLAN FC-ID
--------- --------------- ------- ---- -----
d4:ae:52:1b:e3:cd Te 1/11 54:7f:ee:37:34:40 100
62:00:11
show fip-snooping fcf
Display information on the FCFs in FIP-snooped sessions, including the FCF interface and MAC address,
FCF interface, VLAN ID, FC-MAP value, FKA advertisement period, and number of ENodes connected.
S4820T
Syntax
show fip-snooping fcf [fcf-mac-address]
Parameters
fcf-mac-
address
Enter the MAC address of the FCF to display.
FIP Snooping
711