Filter
Top Products
13
Data Center Bridging (DCB)
Data center bridging (DCB) refers to a set of IEEE Ethernet enhancements that provide data centers with a
single, robust, converged network to support multiple traffic types, including local area network (LAN),
server, and storage traffic.
The Dell Networking operating software commands for data center bridging features include 802.1Qbb
priority-based flow control (PFC), 802.1Qaz enhanced transmission selection (ETS), and the data center
bridging exchange (DCBX) protocol.
This chapter includes the following sections:
• DCB Command
• PFC Commands
• ETS Commands
• DCBX Commands
DCB Command
The following DCB command is supported on the Dell Networking OS.
dcb-enable
Enable data center bridging.
Syntax
dcb enable[pfc-queues 1|4]
To disable DCB, use the no dcb enable command.
Parameters
pfc-queues Enter the pfc-queue range. To disable DCB, use the no dcb
enable command. The range is from 1 or 2.
Defaults None
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Version
Data Center Bridging (DCB)
559