Filter
Top Products
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
rip (OPTIONAL) Enter the keyword rip to specify that RIP
routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
static (OPTIONAL) Enter the keyword static to specify that only
manually configured routes are distributed.
Defaults Not configured.
Command
Modes
ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Usage
Information
The distribute-list out command applies to routes autonomous system
boundary routers (ASBRs) redistributes into OSPF. It can be applied to external type
2 and external type 1 routes, but not to intra-area and inter-area routes.
Open Shortest Path First (OSPFv2 and OSPFv3)
1277