Filter
Top Products
Enter the keywords port-set port-pipe then the port
pipe number. The range is from 0 to 5.
hg-seed seed-
value stack-
unit
Z-Series only: Enter the keywords hg-seed then the hash
algorithm seed value. The range is from 0 to 2147483646.
Enter the keywords stack-unit then the stack unit number.
Enter the keywords port-set then the stack-unit port-pipe
number.
lag hash
algorithm
Z-Series only: Enter the keywords hg-seed . The range is
from 0 to 47.
nh-ecmp
hashalgorithm
value
(OPTIONAL) Enter the keyword nh-ecmp followed by the
ECMP hash algorithm value.
stack-unit
number
(OPTIONAL) : Enter the keywordstack—unit followed by the
stack—unit slot number.
ip-sa-mask
value
(OPTIONAL) Enter the keyword ip-sa-mask followed by the
ECMP/LAG hash mask value. The range is from 0 to FF.
ip-da-mask
value
(OPTIONAL) Enter the keyword ip-da-mask followed by the
ECMP/LAG hash mask value. The range is from 0 to FF.
Defaults IPSA and IPDA mask value is FF for the stack-unit.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Added the nh-ecmp option.
686
Equal Cost Multi-Path (ECMP)