Filter
Top Products
Version Description
8.4.2.1 Introduced on the C-Series and S-Series.
8.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
You can separately configure both IPv4 and IPv6 domain name servers.
ipv6 nd dad attempts
To perform duplicate address detection (DAD) on the management interface, configure the number of
neighbor solicitation messages that are sent.
S4820T
Syntax
ipv6 nd dad attempts {number of attempts}
To restore the default value, use the no ipv6 nd dad attempts command.
Parameters
number of
attempts
Enter the number of attempts to be made to detect a
duplicate address. The range is from 0 to 15. Setting the
value to 0 disables DAD on the interface.
Default 3 attempts
Command
Modes
INTERFACE (management interface only)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
IPv6 Basics
995