Filter
Top Products
ip ssh rhostsfile
Specify the rhost file used for host-based authorization.
Syntax
ip ssh rhostsfile {WORD}
Parameters
WORD Enter the rhost file name for the host-based authentication.
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Example
Dell#conf
Dell(conf)# ip ssh rhostsfile flash://shosts
Dell(conf)#
Usage
Information
This command specifies the rhost file used for host-based authentication. This
creates/ file overwrites the flash:/ADMIN_DIR/ssh/shosts file and deletes
the user-specified file. Even though this command is a global configuration
command, it does not appear in the running configuration because you only need
to run this command once.
This file contains hostnames and usernames, for which hosts and users, rhost-
authentication can be allowed.
NOTE: For rhostfile and pub-key-file, the administrator must FTP the
file to the switch.
1646
Security