Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
---------------------------------------
MCAST 3 0
Unit 1 unit: 3 port: 25 (interface Fo 1/168)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
MCAST 3 0
Unit 1 unit: 3 port: 29 (interface Fo 1/172)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
MCAST 3 0
Unit 1 unit: 3 port: 33 (interface Fo 1/176)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
MCAST 3 0
Unit 1 unit: 3 port: 37 (interface Fo 1/180)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow layer2 stack-unit id port-set number
[counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe,
display which system flow entry the packet hits and what
queue the packet takes as it dumps the raw system flow
tables.
stack-unit id Enter the keywords stack-unit to select a stack member
ID. The range is from 0 to 11.
port-set
number
[counters]
Enter the keywords port-set with a port-pipe number.
The range is from 0 to 0.
(OPTIONAL) Enter the keyword counters to display hit
counters for the selected ACL or QoS option.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Debugging and Diagnostics
641