Filter
Top Products
mac [source-
mac | source-
port-id |
source-
module-id |
dest-mac |
dest-port-id |
dest-module-
id | vlan |
ethertype |
source-dest-
mac ]
To use MAC key fields in hash computation, enter the
keyword mac then one of the parameters:
• source-mac — Use source-mac field in hash calculation.
• source-port-id — Use src-port-id field in hash
calculation.
• source-module-id — Use src-module-id field in hash
calculation.
• dest-mac — Use dest-mac field in hash calculation.
• dest-port-id — Use dest-port-id field in hash calculation.
• dest-module-id — Use dest-module-id field in hash
calculation.
• vlan — Use vlan field in hash calculation .
• ethertype — Use Ethertype field in hash calculation.
• source-dest-mac — Use SMAC and DMAC fields in hash
calculation.
tunnel [ipv4-
over-ipv4 |
ipv4-over-gre-
ipv4 | mac-in-
mac]}
To use tunnel key fields in hash computation, enter the
keyword tunnel then one of the parameters:
• ipv4-over-ipv4 — Use ipv4-over-ipv4 field in hash
calculation.
• ipv4-over-gre-ipv4 — Use ipv4-over-gre-ipv4 field in
hash calculation.
• mac-in-mac — Use mac-in-mac field in hash calculation.
Defaults IP selection 5-tuples (source-ip dest-ip vlan protocol L4-source-port L4-dest-
port).
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Added support for IPv6.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
IPv4 Routing
935