Filter
Top Products
Parameters
high Enter the keyword high to set the DRP value as high.
low Enter the keyword low to set the DRP value as low.
medium Enter the keyword medium to set the DRP value as medium.
Defaults none
Command
Modes
POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands
• ipv6 nd ra-guard enable — Allow you to configure the RA guard related
commands.
• ipv6 nd raguard policy policy-name — Defines the router advertisement (RA)
guard policy name and enter the RA guard policy configuration mode.
show config
Display the RA guard policy mode configurations.
Syntax
show config
Command
Modes
POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Example
Dell(conf)#ipv6 nd ra-guard policy test
Dell(conf-ra_guard_policy_list)#show config
!
ipv6 nd ra-guard policy test
device-role router
1236
Neighbor Discovery Protocol (NDP)