Filter
Top Products
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Related
Commands
private-vlan mode — sets the mode of the selected VLAN to community, isolated,
or primary.
private-vlan mapping secondary-vlan — maps secondary VLANs to the selected
primary VLAN.
show arp — displays the ARP table.
switchport mode private-vlan — sets PVLAN mode of the selected port.
private-vlan mode
Set PVLAN mode of the selected VLAN to community, isolated, or primary.
S4820T
Syntax
[no] private-vlan mode {community | isolated | primary}
To remove the PVLAN configuration, use the no private-vlan mode
{community | isolated | primary}
command syntax.
Parameters
community Enter the keyword community to set the VLAN as a
community VLAN.
isolated Enter the keyword isolated to configure the VLAN as an
isolated VLAN.
primary Enter the keyword primary to configure the VLAN as a
primary VLAN.
Defaults none
Command
Modes
INTERFACE VLAN
1436
Private VLAN (PVLAN)