Filter
Top Products
hostname dynamic
Enables dynamic learning of hostnames from routers in the domain and allows the routers to advertise
the hostname in LSPs.
Syntax
hostname dynamic
To disable this command, use the no hostname dynamic command.
Defaults Enabled.
Command
Modes
ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage
Information
To build name-to-systemID mapping tables through the protocol, use this
command. All show commands that display systems also display the hostname.
Related
Commands
clns host — defines a name-to-NSAP mapping.
ignore-lsp-errors
Ignore LSPs with bad checksums instead of purging those LSPs.
Syntax
ignore-lsp-errors
To return to the default values, use the no ignore-lsp-errors command.
Defaults In IS-IS, the default deletes LSPs with internal checksum errors (no ignore-lsp-
errors
).
Command
Modes
ROUTER ISIS
Intermediate System to Intermediate System (IS-IS)
1049