Filter
Top Products
l2acl number
ipv4acl number
ipv6acl
number,
ipv4qos
number l2qos
numberl2pt
number
ipmacacl
number
ecfmacl
number
{nlbclusteracl]
[vman-qos |
vman-dual-qos
number]
ipv4pbr
numberopenflo
w {4|8} | fcoe
number
[iscsioptacl
number]
[vrfv4acl
number]
Allocate space to each CAM region.
Enter 4 or 8 for the number of OpenFlow FP blocks.
• 4: Creates 242 entries for use by the OpenFlow controller
(256 total entries minus the 14 entries reserved for
internal functionality)
• 8: Creates 498 entries for use by the OpenFlow controller
(512 total entries minus the 14 entries reserved for
internal functionality)
The fcoe range is 0–6 groups. Each group has 128 entries;
the value given must be an even number. This information is
stored in the NVRAM and is effective after rebooting the
switch.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added the nlbcluster ACL keyword. Introduced on the
S6000-ON.
9.4.(0.0) Added support for PBR and VRF.
9.2(0.2) Added support for fcoe.
9.1.(0.0) Added support for OpenFlow.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.2 Clarified block information for the S4810.
8.3.10.0 Introduced on the S4810.
8.3.1.0 Added the keywords ecfmacl, vman-qos, and vman-
dual-qos.
542
Content Addressable Memory (CAM)