Filter
Top Products
• baudrate
• primary_boot
•
secondary_boot
• default_boot
• ipaddr
• gatewayip
• netmask
• macaddr
• mgmtautoneg
• mgmtspeed100
• mgmtfullduplex
Each boot path variable (primary_boot, secondary_boot, and default_boot) is
further split into the following three independent variables:
• primary_server, primary_file, and primary_type
• secondary_server, secondary_file, and secondary_type
• default_server, default_file, and default_type
NOTE: For information on the default values that these variables take, refer
to the Restoring Factory Default Environment Variables section in the Dell
Networking OS Configuration guide.
Example (all
stack units)
Dell#restore factory-defaults stack-unit all clear-all
**************************************************************
* Warning - Restoring factory defaults will delete the
existing *
* startup-config and all persistent settings (stacking,
fanout, etc.)*
* All the units in the stack will be split into standalone
units. *
* After restoration the unit(s) will be powercycled
immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
0 Success Success
1 Success Success
2 Success Success
3 Not present
4 Not present
5 Not present
Power-cycling the unit(s).
Dell#
Example (single
stack)
Dell#restore factory-defaults stack-unit 0 clear-all
**************************************************************
* Warning - Restoring factory defaults will delete the
existing *
* startup-config and all persistent settings (stacking,
File Management
81