Filter
Top Products
The export-target and import-target support only the match protocol and match
prefix-list options. Other options that are configured in the route-maps are
ignored.
Related
Commands
ipv6 route-export – exports IPv6 routes to another VRF.
match source-protocol
Enables you to specify matching criteria while exporting or importing routes.
Syntax
match source-protocol {bgp | isis | ospf | connected | static}
Parameters
bgp Enter the keyword bgp to leak or share routes corresponding
to the BGP protocol.
isis Enter the keyword isis to leak or share routes corresponding
to the ISIS protocol.
ospf Enter the keyword ospf to leak or share routes
corresponding to the OSPF protocol.
connected Enter the keyword connected to leak or share connected
routes corresponding to the VRF.
static Enter the keyword static to leak or share static routes
corresponding to the VRF.
Defaults N/A
Command
Modes
ROUTE MAP MODE
Command
History
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, and Z9500.
Usage
Information
You can specify the matching criteria only after defining a route-map. Before using
this command, you must enter the route map mode using the route-map route-
map-name command. The match criteria that you specify is associated with the
route-map that you define.
The export-target and import-target support only the match protocol and match
prefix-list options. Other options that are configured in the route-maps are
ignored.
1880
Virtual Routing and Forwarding (VRF)