Filter
Top Products
Parameters
qos-policy-
name
Enter the name of the policy map in character format (32
characters maximum).
Defaults none
Command
Modes
CONFIGURATION (policy-map-input and policy-map-output)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage
Information
If the rate shape exists in both aggregate and per-queue qos-policy, minimum of 2
take effect. Some of all Queue-rate will not exceed aggregate.
Related
Commands
policy-map-input — creates an input policy map.
policy-map-output — creates an output policy map.
policy-map-input
Create an input policy map.
S4820T
Syntax
policy-map-input policy-map-name cpu-qos | [layer2]
To remove an input policy map, use the no policy-map-input policy-map-
name cpu-qos | [layer2] command.
Parameters
policy-map-
name
Enter the name of the policy map in character format (32
characters maximum).
cpu-qos Enter the cpu-qos keyword to assign this ACL to control
plane traffic only.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
Quality of Service (QoS)
1477